Alarm voice:130dB
Function:Water Leakage Alarm Detector
Features:
130dB loud alarm voice, keep alarm to notice you or neighbors until the water dry or sensor turn off
High sensitive 24k plating detect board
95cm cable, easy extend by user, detect water anywhere corner
3M double side paster for easy install anywhere
Supply by 9V battery (not include), power save technology for more than 12 months battery working time

Description:
Can be applied for fish tank, solar water heater, pool, kitchen and so on.
If the detect board put on metal directly, please use a paper under detect board, avoid false alarm.
Turn on the product, install it at the place you want and put the sensor chip where water leaks.

Specifiations:
Power: 9V battery (not include)
Size: 90x58x26mm
Weight: 110g
Material: ABS
Work Alone: Yes
Alarm power: 0.6W

Package included:
1 x Water Overflow Leakage Alarm

1. Dual mode control, can be converted to manual operation when the remote control is not in hand, one-button conversion mode, simple and convenient.
2. Weak induction, no need to worry about the product is too low and not sound an alarm, causing the thief to enter the house, as long as the door opening of 1cm will immediately send out a 100-dB alarm, so that the thief does not dare to enter the home.
3. When the battery is too low, the product warning light will flash.
4. In the wireless remote control mode, the wireless remote control can be equipped so that the whole family can control the alarm, and up to five can be equipped.
5. EVA strong adhesive on the back of the product, just remove the protective sticker on the back to install directly.

Product specifications:
1. Host battery (purchased by yourself): 3 AAA (7) batteries.
2. Remote control battery (included): One CR2032 (button) battery.
3. Applicable places: family, single apartment, renting house, company office, jewelry cabinet, clothing cabinet, mobile phone cabinet, etc.

1. The S15 security alarm device with touch sensor for secured and high anti-theft to protect the display merchandise. It with built-in lithium battery that is can be good protect & charging for mobile phone, and good experience for customers.
2. The original RJ connector changed to type-C interface, it will be more convenience and stability.
3. Alarm functions:
- Touch sensor release alarming
- Cutting cable release alarming
- Remove bottom release alarming
- Pull out the cable release alarming
4. Alarm volume: 100dB
5. Input voltage: 110-220V
6. Charging voltage: DC 5.5V 2A
9. Decoding ways: Infrared unlock

1. Model: PA-100
2. Rated Voltage: DC-12V
3. Rated current: 250mA
4. Flash: flash tube
5. Alarm: Single alarm
6. Loudness: 90DB
7. Alarm time: can be selected
8. Tamper, anti-cut lines are
9. ABS shell shell fire
10. Lens color red, blue optional
11. Waterproof degree: IP54
12. Wall installation
13. Dimensions: 205 x 115 x 65mm
14. Direct power supply is: 12V

1. In any operation in which both hands need to be used, a footswitch is a perfect way to add greater control.
2. It free up your hands to perform other procedure while make the operation in control with your foot.
3. This foot switch is momentary action and can be wired to be either push-on or push-off.
4. A positive switch feel and an audible "click" when pressed.
5. Could be used in industry equipment, instruments and other fields need foot switch
6. With anti-skid rubber surface, four bottom pads and 56 inch long cable for connecting to machine.
7. The US customers need to use a voltage converter to make the foot switch work normally when using it.

Specification:
1. Product Name Foot Switch
2. Type Momentary Contact
3. Material Metal(Case) and Rubber(Surface)
4. Voltage AC 250V 10A
5. Size: 10 x 6.5 x 2.5 cm
6. Cable Length: 142cm
7. Weight: 310g

Parameter:
1. Material: ABS
2. Weight: about 250g
3. Size: about 9x8.5x9cm
4. Charging method: solar charging
5. Solar panel: 5Vx120mA ETFE solar panel
6. Charging time: more than 10 hours
7. LED lamp beads: 8 flashing red LEDs
8. Sensing angle: 70 degrees
9. Alarm sound: 129 decibels
10. Waterproof rating: IP65
11. Battery parameters: 3.7Vx1200mAH lithium battery (the remote control contains 2025 button batteries)
12. Induction distance: 5-8 meters (affected by ambient temperature)
13. Remote control distance: 10 meters-more than 200 meters (distance is affected by obstacles and interference signals)
14. Function: 24 hours sound and light alarm mode + 24 hours flash silent alarm mode + night sound and light alarm mode + night flash silent alarm mode

Features:
1. It can be equipped with indoor alarm host and telephone alarm function (optional model)
2. Suitable for all-weather outdoor use, with IP65 waterproof function, energy saving, environmental protection and safety
3. Suitable for homes, orchards, construction sites, farms, warehouses and other places that require security alarms
4. The sensing distance of 5-8 meters, the sensing angle of 70 degrees, the high-pitched alarm of 129 decibels and the flashing warning lights
5. All-weather 24-hour working mode and 12-hour night working mode are optional
6. 120 days of long standby, an average of 1 hour in the sun per day can be charged to maintain continuous power work
7. Long-distance wireless remote control, the sensing angle can be adjusted at will
8. Solar charging, rechargeable lithium battery, can be recycled for a long time
9. It can detect the activities of people within the sensing range and continue to alarm, and stop the alarm after leaving about 40 seconds

Remote control instructions:
1. Before using the remote control, press the switch of the main unit to turn it on
2. The remote control distance is 10 meters-more than 200 meters. Pulling out the remote control antenna can enhance the remote control signal. Wireless remote control will be affected by environmental signal interference and buildings.
3. The remote control can be used with 1 with 1 or 1 with multiple hosts (when you need to use one remote control with multiple hosts, you need to turn on the host one by one for 1 to 1 code)
4. Wireless remote control function, long press any position of the remote control for 5 seconds to shut down (remote control shutdown standby)

1. Working voltage: DC250V
2. Operating Current: Less than or equal to 300mA
3. Contact modes: normally open, normally closed
4. Material: ABS plastic
5. Operating temperature: -40 degree C to 125 degree C

1. Loud 85db alarm
2. Permanent carbon monoxide sensor
3. The red LED will flash while in alarm mode
4. Standby: Green Led flashes once every 30 seconds
5. Low-bat Indicator: Chirp every 30s as battery lower than 3.3V with green LED flashing and Lb on LCD
6. 3 digits LCD display
7. Power supply: 3 x AA batteries (not included)
8.Sensitivity & time: 50ppm, alarms within 60~90 minutes; 100ppm, alarms within 10~40 minutes; 3000ppm, alarms within 3 minutes
9. Standby current: Less than 50uA
10. Alarm current: Less than 50mA