1. Puce capteur : CMOS 8MP & 2MP
2. Résolution photo :
- 32MP
- 20MP : 5200 x 3900 (interpolé)
- 16MP : 4608 x 3456 (interpolé)
- 12MP : 4000 x 3000 (interpolé)
- 8M : 3264 x 2448
- 5M : 2592 x 1944
- 3M : 2048 x 1536
- 1M : 1280 x 960
3. Résolution vidéo : 3840x2160/10fps ; 2688x1520/20fps ; 1920x1080/30fps ; 1280x720/60fps ; 1280x720/30fps ; 720x480/30fps ; 640x480/30fps ; 320x240/30fps
4. Format de fichier : JPG/AM
5. Objectif : jour : F=3,3mm, F/NO 2,0, FOV=110 degrés ; nuit : F=4,0mm, F/NO 1,4, FOV=110 degrés
6. Écran : TFT 2,4 pouces 720x320
7. Stockage : carte TF (classe 6 recommandée ou supérieure), jusqu'à 512 Go
8. Clavier : 8 boutons
9. Module Wifi : Oui
10. Lumière infrarouge : 38 pièces
11. Distance de vision nocturne : environ 35 mètres
12. Distance de déclenchement : environ 25 mètres / 82 pieds (température 25 degrés Celsius / 77 degrés Fahrenheit)
13. Sensibilité du capteur PIR : élevée, moyenne, faible
14. Angle de détection infrarouge PIR : PIR principal (60 degrés) + PIR secondaire gauche et droit = 110 degrés
15. Temps de déclenchement : 0,2 seconde
16. Prise de vue en accéléré : 5 secondes - 60 minutes, modifiable
17. Prise de vue continue : 1/2/3/6/10
18. Durée vidéo : 3 secondes - 10 secondes, 1 - 10 minutes, modifiable
19. Distance de prise de vue : jour : plus de 1,5 mètre ; nuit : 1,5 mètres - 20 mètres
20. Mode de prise de vue : première photo puis vidéo
21. Filigrane temporel : activé/désactivé (incluant heure, température et phase lunaire)
22. Enregistrement en accéléré : activé/désactivé, modifiable
23. Enregistrement en accéléré : 3 secondes - 24 heures
24. Enregistrement en boucle : activé/désactivé, (lorsqu'activé, le fichier le plus ancien sera supprimé lorsque la carte est presque pleine)
25. Enregistrement temporisé : de 1 seconde à 24 heures, modifiable
26. Numéro de série de l'appareil : 4 chiffres / lettres
27. Microphone et haut-parleur : intégrés
28. Tri automatique des documents : supporté (tri des documents en couleur et en noir et blanc)
29. Extinction automatique de l'écran : extinction de l'écran après 2 minutes sans aucune opération
30. Sortie vidéo : supportée
31. Interface : mini USB2.0
32. Alimentation : 8 piles AA 2x (non incluses), alimentation externe 6V/1,5A
33. Autonomie en veille : jusqu'à 18 mois
34. Trou de serrure : supporté
35. Mot de passe : mot de passe numérique à 4 chiffres
36. Indice d'étanchéité : IP66
37. Température de fonctionnement : -20 à 60 degrés Celsius
38. Température de fonctionnement de la carte mémoire : -30 à 70 degrés Celsius
39. Dimensions extérieures : environ 13,6 x 9 x 7,6 cm

Caractéristiques :
1. Double caméra grand angle, activez la caméra HD 8 millions de pixels pour prendre des photos de haute qualité et des vidéos 4K en journée, et activez la caméra nocturne starlight haute sensibilité 2 millions de pixels pour filmer des vidéos FHD en noir et blanc à haute luminosité, haute définition et faible bruit la nuit
2. Mode silencieux, pas de bruit de commutation IR CUT, ne fait pas fuir les animaux
3. Déclenchement ultra-rapide du capteur en 0,2 secondes
4. Vidéo HD 4K, écran HD 2,4 pouces 720x320, haute résolution, images plus nettes
5. Distance de déclenchement du capteur de 25 mètres, portée de la lumière infrarouge de 35 mètres
6. Étanchéité IP66 et protection contre la poussière, fonction de verrouillage antivol

Liste de colisage :
- Caméra x 1
- Câble USB x 1
- Câble AV x 1
- Sangle x 1
- Support de fixation murale x 1
- Vis x 3
- Tube d'expansion x 2
- Petit outil x 1

Features
1. Stylish appearance, mini and exquisite, first-person shooting perspective, food sharing, extreme sports, pet perspective (view new fun from the pets perspective).
2. The product comes with magnetic suction and a 120-degree wide-angle lens, which can be installed at any angle you want.
3. Portable back clip design, clip clothes pockets, folders, school bag straps, waist, etc., for easy carrying.
4. Support WiFi real-time sharing, support installation of various models and helmets, and can be waterproof underwater with a waterproof shell.
5. Built-in large-capacity lithium battery, ultra-long battery life, support recording while charging, and built-in loop recording function.
6. Widely used in car recording, pets, diving, fishing, cycling, mountaineering, surfing, travel records, life records, outdoor activities, etc.

Parameters
1. Video format: MP4
2. Lens angle: ultra-wide angle
3. Video resolution: 1920 x 1080P
4. Video frame rate: 30 frames
5. Video encoding: H.264
6. Photo resolution: 4032 x 3024
7. Photo format: JPG
8. Memory card: TF card (up to 256G)
9. Battery capacity: 800mAh
10. Charging interface: Type-C
11. Charging time: about 2H
12. Power supply: 5V 2A
13. Size: 64.5x28x20mm
14. Storage temperature: -10 to 60 degrees Celsius
15. Operating temperature: -10 to 60 degrees Celsius

Features
1. Stylish appearance, mini and exquisite, first-person shooting perspective, food sharing, extreme sports, pet perspective (view new fun from the pets perspective).
2. The product comes with magnetic suction and a 120-degree wide-angle lens, which can be installed at any angle you want.
3. Portable back clip design, clip clothes pockets, folders, school bag straps, waist, etc., for easy carrying.
4. Support WiFi real-time sharing, support installation of various models and helmets, and can be waterproof underwater with a waterproof shell.
5. Built-in large-capacity lithium battery, ultra-long battery life, support recording while charging, and built-in loop recording function.
6. Widely used in car recording, pets, diving, fishing, cycling, mountaineering, surfing, travel records, life records, outdoor activities, etc.

Parameters
1. Video format: MP4
2. Lens angle: ultra-wide angle
3. Video resolution: 3840 x 2160P
4. Video frame rate: 30 frames
5. Video encoding: H.264
6. Photo resolution: 4032 x 3024
7. Photo format: JPG
8. Memory card: TF card (up to 256G)
9. Battery capacity: 800mAh
10. Charging interface: Type-C
11. Charging time: about 2H
12. Power supply: 5V 2A
13. Size: 64.5x28x20mm
14. Storage temperature: -10 to 60 degrees Celsius
15. Operating temperature: -10 to 60 degrees Celsius

1. Résolution vidéo : 4K/10 ips, 2,7K/20 ips, 1080p/25 ips, 720p/30 ips
2. Résolution photo : 32 MP 6480 x 4860, 20 MP 5200 x 3900, 16 MP 4608 x 3456, 12 MP 4000 x 3000, 8 MP 3264 x 2448, 5 MP 2592 x 1944, 3 MP 2048 x 1536, 1 MP 1280 x 960
3. Lampes infrarouges : 3 lampes infrarouges haute puissance de 850 nm, portée de vision nocturne de 20 m
4. L'angle de détection PIR est de 120 degrés et la distance est de 30 mètres.
5. Objectif de niveau étoile, grand angle de 110 degrés
6. Temps de déclenchement : 0,2 s
Écran couleur de 7,24 pouces, compatible avec la lecture de photos et de vidéos
8. Grâce aux modules WiFi et Bluetooth, la portée de la connexion WiFi est de 30 mètres.
9. Conception à faible consommation, autonomie en veille de 12 mois.
10. Prise en charge de l'extension par carte TF jusqu'à 512 Go
11. Alimentation : 8 piles AA (non fournies), possibilité de connecter un adaptateur secteur externe ou un panneau solaire
12. Étanchéité IP66

1. Adapter la disposition standard familière du clavier à la paume de votre main
2. Prend en charge la fonction de pavé tactile multipoint : un clic à un doigt équivaut à un clic gauche, un clic à deux doigts à un clic droit, et un glissement à deux doigts à un défilement d’écran.
3. Fonction de mise en veille et de réveil automatique : passe automatiquement en mode veille après 3 minutes d’inactivité.
4. Batterie au lithium rechargeable intégrée de 300 mAh
5. Courant de charge : environ 300 mA
6. Courant de veille : environ 1 mA
7. Tension de fonctionnement : 3,3 V
8. Courant de fonctionnement : environ 50 mA
9. Dimensions du produit : 13,9 x 9,1 x 1,7 cm

1. Tout neuf et de haute qualité
2. Écran LCD LTPS de 2 pouces
3. Télécommande Wi-Fi
4. Définition 4K Ultra-HD
- 4K 2K @ Motion-JEPG
- 1920*1080@60/30fps (H.264)
-1280*720@120fps (H.264)
5. Objectif grand angle HD de 12 mégapixels
6. Objectif fisheye ultra-large 6G HD de 170 degrés
7. Un boîtier résistant à l'eau qui vous permet de filmer des sports nautiques fascinants; résistant à l'eau jusqu'à 30 mètres sous l'eau
8. Port USB 2.0 haute vitesse
9. Fonction de sortie HDMI HD
10. Supporte la carte mémoire la plus élevée de 32G (non incluse)
11. Batterie au lithium rechargeable de 900 mAh intégrée

Caractéristiques
1. Processeur: RK3528 quad-core Cortex-A53
2. GPU: Mali-450
3. Mémoire: 4 Go, Flash: 64 Go
4. Système d'exploitation: Android 13.0
5. Bluetooth: BT 5.0
6. Ethernet: RJ-45 standard, support 100M
7. Sans fil: 2.4G/5G, IEEE 802.11 a/b/g/n/ac/ax
8. Alimentation: CC 5V/2A
9. Décodeur vidéo
- Décodeur vidéo en temps réel MPEG-1, MPEG-2, MPEG-4 H.263, H.264/AVC, H.265/HEVC, MVC VC-1 AVS, AVS+, AVS2
- H.265 HEVC/MVC Main10 L6.1: 8K 25fps (7680x4320)
- Profil H.264/AVC BP/MP/HP au niveau 5.1; H.264/AVC MVC; jusqu'à 4K x 2K 60fps
- Profil H.265/HEVC Main/Main10 au niveau 5.1 High-tier; jusqu'à 4Kx2K à 60fps
- AVS2 4KX2K à 60fps
- MPEG-1, profil principal, jusqu'à 1080P à 60fps
- MPEG-2, SP à ML, MP à HL, jusqu'à 1080P à 60fps
- MPEG-4, profil ASP au niveau 5, jusqu'à 1080P à 60fps
- AVS, profil Jizhun au niveau 6.0; jusqu'à 1080P à 60fps
- AVS-P16 (AVS+), jusqu'à 1080P à 60fps
- H.263, jusqu'à 576P 60fps
- VC-1, SP à ML, MP à HL, AP à L0-3, jusqu'à 1080P à 60fps
10. Interface d'affichage
- Prise en charge de la sortie HDMI 2.0b jusqu'à 4K 10 bits à 60 Hz
- Interface TV: encodeur TV 10 bits pour DAC
- Interface HDMI: 24 bits (RGB888 YCbCr444), 30 bits (RGB101010, YCbCr 420, YCbCr 444)
- Résolution de sortie maximale 4K pour HDMI, 480i/576i pour CVBS
- Prise en charge de 1 couche de cluster, 4 couches intelligentes
- Prise en charge HDR10, HLG HDR, Vivid HDR
11. Audio: Prise en charge MP3, AAC, WMA, RM, FLAC
12. Image: HD JPEG, BMP, GIF, PNG, TIF
13. Langue: Multi-langues
14. Entrées/Sorties:
- 1 x HDMI: Sortie UHD 4K x 2K
- 1 x AV: Prise en charge
- 1 x SPDIF: Prise en charge
- 2 x USB: 1 x USB 2.0, 1 x USB 3.0
- 1 x Récepteur IR: Connecteur de récepteur à distance
- 1 x RJ45: Interface Ethernet; Prise en charge 100M
- 1 x Carte TF: Prise en charge 4 Go/8 Go/16 Go/32 Go/64 Go/128 Go/256 Go (non incluse)

Applications
1. En ligne: Parcourez tous les sites web de vidéos, supporte Netflix, Hulu, Flixster, Youtube, etc.
2. Applications: Téléchargez des applications librement depuis Android Market, Amazon App Store, etc.
3. Média: Lecture de médias locaux, prise en charge HDD, U Disk, carte TF.
4. Communication en ligne: Prise en charge des appels vidéo SKYPE, MSN, Facebook, Twitter, QQ, etc.
5. Autres:
- Prise en charge Email, suite bureautique, etc.
- Prise en charge de la fonction DLNA
- Prise en charge de la souris/clavier sans fil 2.4G

Liste de l'emballage
1. Boîtier TV x 1
2. Câble HDMI x 1
3. Adaptateur secteur x 1
4. Télécommande IR x 1
5. Manuel d'utilisation x 1
6. Boîte d'emballage x 1

Spécifications du système :
1. CPU : ARM Cortex-A53 quad-core
2. GPU : Mali G31, prend en charge OpenGL ES 3.2
3. RAM : 2 Go
4. ROM : 8 Go / 16 Go
5. Wi-Fi : Wi-Fi 6, prend en charge les protocoles IEEE 802.11a/b/g/n/ax
6. Bluetooth : BT5.0 (prend en charge uniquement la connexion à une télécommande Bluetooth ; ne prend pas en charge la connexion à d'autres appareils Bluetooth)

Interfaces E/S :
1. 1 port HDMI : prend en charge une sortie jusqu'à 4K
2. 1 port USB : port USB 2.0
3. 1 alimentation CC : 5V/2A

Spécifications logicielles :
1. Système d'exploitation : Android 14.0
2. Décodeur vidéo : prend en charge le décodage vidéo jusqu'à 4K 60fps
1) Prend en charge plusieurs formats :
H.265 Main10 L5.1 jusqu'à 4K 60fps
VP9 Profile 2 jusqu'à 4K 30fps
AVS2 Baseline 10 bits jusqu'à 4K 30fps
H.264 BP/MP/HP L4.2 jusqu'à 4K 30fps
H.263 BP jusqu'à 1080P 60fps
2) Encodeur vidéo :
H.264 BP/MP/HP
H.264 prend en charge les trames I/P, seule une seule trame de référence est prise en charge
MJPEG/JPEG Baseline
L'encodage H.264 prend en charge une résolution maximale de 16 mégapixels (4096x4096)
Capacité d'encodage H.264 : 1080P 60fps
3) Décodeur JPEG
Prend en charge l'encodage JPEG, performances jusqu'à 1080P 60fps
Prend en charge les résolutions d'image configurables
Prend en charge les tables de quantification configurables pour les composants Y, Cb et Cr respectivement.
Prend en charge l'incrustation frontale OSD (affichage à l'écran).
Prend en charge la conversion couleur vers niveaux de gris.
4) Fonctionnalité HDMI
Compatible avec les protocoles de protection contre la copie HDCP 2.2 et HDCP 1.4.
Prend en charge DDC (Display Data Channel) et SCDC (Status and Control Data Channel).
Moteur matériel CEC (Consumer Electronics Control) intégré.
5) Prise en charge vidéo :
Vidéo 2D : 4K/1080P/1080i/720P/576P/480P/576i/480i, jusqu'à 4K 60fps
Vidéo 3D : 4K/1080P/720P/576P/480P, jusqu'à 4K 30fps
Prend en charge les formats de sortie RGB/YUV444/YUV422/YUV420.
Profondeur de couleur : 8/10 bits
HDR10 : Conforme aux normes CTA-861.3 et SMPTE ST. 2048
3. Fonctionnalité audio : prend en charge les formats audio MP3, AAC, WMA, RM et FLAC.
4. Fonctionnalité d'image : prend en charge les formats d'image haute définition JPEG, BMP, GIF, PNG et TIF.
5. Prise en charge linguistique : prend en charge plusieurs langues.

Applications :
1. Fonctionnalité en ligne : naviguez sur tous les sites Web vidéo, prend en charge Netflix, Hulu, Flixster, YouTube, etc.
2. Téléchargement d'applications : téléchargements gratuits d'applications depuis les magasins d'applications Android, Amazon Appstore, etc.
3. Lecture multimédia : lecture multimédia locale, prend en charge les disques durs et les clés USB.
4. Appels en ligne : prend en charge les appels vidéo Skype, MSN, Facebook, Twitter, QQ, etc.
5. Autres fonctionnalités :
Prend en charge les e-mails, les logiciels de bureautique, etc.
Prend en charge la fonctionnalité DLNA
Prend en charge la souris/le clavier sans fil 2,4G

Apparence :
1. Dimensions : 30,6 mm x 13,2 mm x 77,7 mm
2. Poids : 30 g

Contenu de l'emballage :
1. Clé TV x 1
2. Télécommande x 1
3. Manuel d'utilisation x 1
4. Adaptateur secteur x 1
5. Boîte d'emballage x 1

1. CPU: Amlogic S905X4, ARM Cortex A55 Quad Core
2. GPU: Processeur GPU G31 MP2
3. Mémoire: LPDDR4: 4 Go
4. Flash: eMMC 32 Go
5. WiFi: IEEE 802.11 a/b/g/n/ac, 2.4G / 5G
6. Bluetooth: Prise en charge BT4.X, prise en charge de la télécommande vocale
7. Interface:
1xHDMI: HDMI 2.1, prise en charge HDMI CEC, HDR dynamique et sortie de résolution maximale 8Kx4K@24
1xAV OUT: Sortie de définition standard 480i/576i
2xUSB: 1 x USB 3.0, 1 x USB 2.0
1xrécepteur IR: Connexion du récepteur à distance
1xRJ45: Interface Ethernet, prise en charge 10/100M/1000M
1xcarte TF: Prise en charge 4GB/8GB/16GB/32GB/64GB (non incluse)
8. Alimentation: DC5V 2A
9. OS: Android 11

1. Processeur: Amlogic S905X4, Quad Core ARM Cortex A55
2. Processeur graphique: G31 MP2
3. Mémoire: LPDDR4: 4GB
4. Flash: eMMC: 64GB
5. Wi-Fi: IEEE 802.11 a/b/g/n/ac, 2.4G / 5G
6. Bluetooth: Prise en charge BT4.X, télécommande vocale prise en charge
7. Interface:
1xHDMI: HDMI 2.1, prise en charge HDMI CEC, HDR dynamique et sortie de résolution maximale 8Kx4K@24
1xAV OUT: sortie de définition standard 480i/576i
2xUSB: 1 x USB 3.0, 1 x USB 2.0
1xRécepteur IR: Connexion du récepteur à distance
1xRJ45: Interface Ethernet, prise en charge 10/100M/1000M
1xCarte TF: Prise en charge 4 Go/8 Go/16 Go/32 Go/64 Go (non incluse)
8. Alimentation: DC5V 2A
9. Système d'exploitation: Android 11

Product specifications:
1. Dimensions (length x width x height): 85x85x12mm.
2. Pitch: 40x40x40mm.
3. Voltage: 12V.
4. Weight: 0.1kg.
5. Power connector: 4 pins.

1. Voltage range: AC 30-260V/45-65Hz
2. Leakage voltage range: 0-99V/45-65Hz
3. Test stroke time: 10-1000mS
4. GFCI test: 5mA (HT97B)
5. RCD test: 30mA (HT97D/HT97E)
6. Voltage measurement: 48V-250V/45-65Hz
7. Power supply: two 1.5V AAA Batteries (Batteries not included)
8. Simply plug the tester into a powered three-pin outlet. The on-screen display allows you to easily determine the outlets wiring condition and AC voltage. If a wiring error is detected, the orange backlight will illuminate to indicate the wiring error.
9. After plugging the tester into the outlet, the data will automatically lock after three seconds. Once locked, press the unlock button.
10. Press and hold the RCD button for more than 2 seconds. A properly functioning residual current circuit breaker (RCD) should trip and display the trip time. The button indicator will flash, indicating the tripping process is complete. If it does not trip, the residual current circuit breaker is faulty.
11. The instrument automatically shuts down if no operation is performed within 5 minutes of powering on.
12. Compact and portable, it is easy to operate.
13. The high-definition backlit display ensures clear visibility even in dimly lit environments, making the test results clear and easy to understand.
14. Widely applicable, it can be used to check the safety of outlet wiring in homes, offices, shopping malls, and other locations.
15. Dimensions: HT97B 67x65x63mm; HT97D 67x65x75mm; HT97E 67x65x63mm
16. Weight: HT97B 92g; HT97D 103g; HT97E 103g

1. Operating voltage: 90-250V / 45-65Hz
2. Phase voltage: 90-250V / 45-65Hz
3. Leakage voltage: 0-99V / 45-65Hz
4. Operating temperature: 0-40 degree Celsius
5. Operating humidity: 20-75%RH
6. Storage temperature: -10~50 degree Celsius
7. Storage humidity: 20-80%RH
8. Altitude: less than 2000m
9. RCD test: more than 30mA
10. RCD working voltage: 220V
11. GFCI test: more than 5mA
12. GFCI working voltage: 110V

1. LCD HD large screen, high-precision measurement
2. LED jack indicator light, do not worry about inserting the wrong probe
3. NCV non-contact voltage detection
4. 220V full gear anti burning, safe and convenient operation
5. Automatic shutdown after 5 minutes no operation

Parameters:
1. Safety level: CAT III 1000V, CAT IV 600V, EN61010-1,-2-030 EN61010-2-033, EN61326-1
2. Measurement function: battery test, resistance, DC current, AC current, AC voltage, DC voltage
3. Features: manual range, on-off test, diode test, data retention, automatic shutdown
4. DC voltage range: 600mV-1000V
5. AC voltage range: 600mV-750V
6. DC current range: 600uA-10A
7. AC current range: 600uA-10A
8. Capacitance range: 10nF-100mF
9. Maximum display: 6000
10. Battery type: 2 x AA batteries (not included)
11. Size: 18.8x8.8x5.8cm
12. Net weight: 350g

1. Measuring range: 10000M
2. Test voltage: 50V-2500V
3. Repeat error: -+0.5%
4. Ambient temperature: 0-60 degrees Celsius
5. Connect the test leads to the circuit or power supply to be tested and read the measurement results from the display
6. When the measured resistance is less than 5000, the buzzer will sound
7. High-definition LCD display with clear characters, suitable for low-visibility nighttime environments
8. During the test process, multiple sets of data can be saved for easy reference.
9. Equipped with complete protection and anti-drop sleeve, which fits closely with the groove to prevent damage
10. The test leads can be inserted smoothly and firmly into the corresponding terminals, and there are maximum limit indications
11. Multiple ranges can be set to facilitate selection as needed
12. Battery: 8x1.5V AA (not included in this product)
13. Designed with a removable PVC silicone protective cover, which is shock-proof and drop-proof, strong and wear-resistant, and protects internal components.
14. It can widely measure leakage switch tripping current, tripping time, loop resistance and online measurement of voltage, frequency, etc. It is an ideal tool for electrical inspection and maintenance.

1. It is widely used in gas pipeline leak detection, household gas prevention, gold mine field, tunnel mine operation oil and gas exploitation field, dangerous goods storage warehouse, etc.
2. It is convenient for users to safely detect various combustible gases, such as methane, carbon monoxide, gasoline, ethylene oxide, etc.
3. Range: 0-1000PPM
4. Accuracy: less than or equal to 10% FS (methane)
5. Sensitivity: less than 50PPM (methane)
6. Response time: less than 2s
7. Preheating time: about 30s

1. Measuring range: AC voltage 0-440V
2. Battery type: 6x1.5V LR14 battery
3. Test voltage: 0~440V
4. Ambient temperature: 0~50 degrees Celsius
5. Relative humidity: 30%~90%
6. Simple operation and accurate test
7. Large-screen backlight display, large fonts, large strokes, clear readings in dim environments
8. It is designed with a detachable PVC silicone protective cover, which is shockproof and drop-resistant, strong, wear-resistant and durable, and protects internal components
9. It can widely measure leakage switch tripping current, tripping time, loop resistance and online measurement voltage, frequency, etc. It is an ideal tool for electrical inspection and maintenance

Note: This product is shipped without batteries

1. Measuring range: 0-9999ppm
2. Measurement accuracy: 10% FS
3. Voltage: 3x1.5V
4. Power supply: 2xAAA batteries
5. Battery type: 3x1.5V AAA
6. It is widely used in gas pipeline leak detection, household gas prevention, gold mine field, tunnel mine operation oil and gas exploitation field, dangerous goods storage warehouse, etc.
7. Standard industrial design, fast response, double alarm.
8. Accurate detection, easy operation.
9. Full-view high-definition reverse display color screen, clearly visible in dark environments.
10. Two-color injection molding, strong and durable, strong body, non-slip and anti-fall.

Note: Shipment without batteries

1. Zero calibration and multi-point calibration: this instrument has been calibrated according to the reference data of the standard substrate (random iron and aluminum block) before leaving the factory, if the user needs to measure other materials, please calibrate the substrate to be measured
2. High sensitivity probe, just press to easily identify the material type and coating thickness
3. High-speed chip is accurate and stable, with a resolution of up to 0.1 micron, every factory instrument can measure accurately
4. Automatic substrate recognition, no need to switch according to different substrate properties, automatic recognition when measuring different substrates
5. Alarm limit setting, when the instruments measurement value is less than the lower limit value or greater than the upper limit value, it will prompt five consecutive beeps alarm
6. Multiple measurement methods to meet different needs: single measurement, continuous measurement, single-point measurement, multi-point measurement
7. Data storage: can store 256 measurement values (8 groups x 32)
8. Automatic flip screen, according to gravity sensing automatically rotate the screen, display content conveniently
9. Built-in 3.7V 700mAh rechargeable lithium battery, long battery life, rechargeable
10. Stable testing, high sensitivity, long service life
11. Large LCD backlight display, clear and intuitive readings, suitable for night measurement
12. Rubber material buttons, with good initial elasticity, increase the comfort of the use process, and buttons on the printing clear, not easy to wear and tear
13. Shell using secondary injection molding process manufacturing, feel good, easy to take, non-slip, more convenient measurement
14. Size: about 145 x 62 x 38mm

1. Measuring range: 0.01-200uT/0.1-2000mG
2. Frequency range: 30-1000Hz
3. Measuring range: 1-2000V/m
4. Range: 2000V/m
5. Resolution: 1V/m
6. Frequency range: 50MHz-3.5GHz
7. Automatic shutdown: about 15 minutes
8. Usage environment: 0-40 degrees Celsius
9. Battery: 3x1.5V AAA battery (not included in this product)
10. When the device detects a magnetic field, it will display different backlight colors according to the size of the measurement value to remind the user
11. Suitable for household appliances working within the power frequency range
12. Small size, does not take up space, easy to carry around

1. Built-in high-precision electromagnetic radiation sensor and microcontroller chip processor can quickly and accurately measure the electromagnetic radiation value.
2. Electric field detection, magnetic field detection, high-frequency detection. The magnetic field detection function can combine X/Y/Z signal detection of the actual field strength, with precise and sensitive measurement.
3. Dual alerts, when the alarm value is exceeded, sound and light display alarm. When the measurement value is less than 0.12uT (12mg), the display screen turns green. When the measurement value is less than 0.40uT (4.0mG), the display screen turns orange. When the measurement value is greater than or equal to 0.40uT (4.0mG), the display screen turns red.
4. USB lithium battery direct charging, no need to replace the battery, convenient and durable.
5. Clear digits, large font display, data reading is more intuitive.
6. Soft and comfortable hand feel, durable, waterproof, dustproof, environmentally friendly and safe, easy to clean.
7. Size: 142 x 72 x 26mm
8. Weight: approximately 150g

1. Measuring range: 0~58.0%
2. Accuracy: +/-2%
3. Ambient temperature: -20~60 degrees C
4. Relative humidity accuracy: +/-5.0%RH
5. Relative humidity range: 0.0~99.9%RH
6. Supply voltage: 3x1.5V
7. Product size: 148x60x33mm
8. Small size, light weight, easy to carry
9. Widely used in wood/paper products, wall bricks, wall putty, cement floor and ambient temperature and humidity

Note: Shipment without battery

1. Digital differential pressure gauge, can capture the smaller pressure difference, reading intuitively and accurately, avoiding the inaccuracy caused by parallax and human reading error of pointer differential pressure gauge
2. The use of high quality and precision sensors, even small differential air pressure can be measured
3. Fast measurement of fluid differential pressure, flow rate and flow velocity within 0.5 seconds
4. One key to switch multiple pressure units, easy to meet your measurement needs
5. Pagoda-type connector, rubber hose is easy and quick to install, excellent sealing performance, strong adaptability
6. High-quality production process, double injection molding of high-quality ABS engineering plastic shell, wear-resistant, drop-resistant
7. Optimized structure design, easy to carry, simple operation
8. High-definition backlight display frequency, not afraid of darkness, easy to measure
9. Rubber buttons, comfortable hand feeling
10. Concave-convex anti-slip design on the side of the body, comfortable to hold, to prevent accidental drops
11. Long battery life, powered by 3 x 1.5V AAA batteries (not included in delivery)
12. Size: about 153 x 60 x 31mm

1. Product size: 96x62x24mm
2. Product weight: about 71g
3. Voltage resistance: 60V
4. Battery type: 2x1.5V AAA batteries
5. Support 8P/6P/4P/2P multi-standard network cable and telephone line test
6. Can test unshielded/shielded network cable, with anti-burning protection function
7. Split structure design, simple measurement, convenient for long-distance detection

Note: Shipment without battery

1. AC Voltage Detection: When the probe end of the voltage tester is close to the AC voltage source, the red signal indicator flashes; the stronger the signal, the faster the red light flashes; at the same time, the beeping sound of the buzzer will increase in frequency with the enhancement of the signal strength
2. Flashlight illumination: LED illumination, convenient to detect voltage in dark environment
3. Circuit breakpoint detection: the pen stops flashing and buzzing when a breakpoint in the circuit is detected
4. Low battery warning: when the battery voltage is too low, the power indicator flashes, suggesting that the battery needs to be replaced in time
5. Auto Power Off: The voltage tester will automatically turn off after about 5 minutes of no signal detection or inactivity to prolong battery life
6. Portable pen clip design: portable and convenient for mobile measurement
7. High-strength shield: sturdy, wear-resistant, unbreakable
8. Inductive field, non-contact voltage detection (NCV): CAT-III 1000V overvoltage category, using non-contact high-sensitivity sensor for safe, fast and non-contact high-voltage detection

Parameters:
1. Display: LED
2. Voltage detection range: AC70-1000V
3. Frequency: 50/ 60Hz
4. Alarm mode: sound and light alarm
5. Probe shape: extended shape
6. Charged and neutral: according to the signal strength indication, the test signal on the firewire is stronger than the neutral
7. Signal strength display: LED from low to high, green to red
8. Signal strength indication method: sound from slow to fast
9. Automatic power-off: no operation, no inductive signal, 5 minutes or so automatic shutdown
10. Power supply: 2 x 1.5V AAA batteries (not included in shipment)
11. Safety level: EN61010-1, -2-030; EN61326-1, CAT-III class 1000V
12. Dimensions: about 146.6 x 24 x 27mm
13. Weight: about 28.7g

1. Signal transmission format: multi-frequency pulse signal
2. Output level: 8Vp-P
3. Connector type: RJ11, RJ45
4. Compatible network cables: CAT5, CAT6
5. Network cable compression detection speed: 1 second
6. Signal transmission distance: 3 kg
7. Input voltage protection: 60 V
8. Network cable detector: detects shielded and unshielded network cables on switches, routers, and other devices operating at less than 60 volts or without power.
9. Phone line finder: finds phone lines connected to powered or unpowered devices.
10. Auto-power off: automatically shuts off after 30 minutes.
11. Power supply: 9V 6F22 Battery
12. After completing the cable search, you can directly perform operations based on the line sequence (including open, short, open, and crossover), improving work efficiency.
13. Primarily used for quickly detecting through-hole faults, locating fault points, and marking lines. It can also be used to quickly determine if a fiber is broken, excessively bent, or poorly connected.
14. Fast and accurate cable location. Adjustable sensitivity allows for quick identification of the desired cable in cluttered environments.
15. Compatible with 4/8-core network cables, coaxial cables, telephone cables, and shielded/unshielded network cables.
16. Quickly troubleshoot line faults and locate breaks, shorts, or damage in cables. Place the receiver probe close to the cable. If you hear a "clicking" sound, this is normal. Move along the cable. If the sound stops, the line is broken.
17. Weight: Transmitter 94g; Receiver 87g.
18. Dimensions: Transmitter 144x60x34mm; Receiver 193x47x31mm

1. Signal transmission format: multi-frequency pulse signal
2. Output level: 8Vp-P
3. Connector type: RJ11, RJ45
4. Compatible network cables: CAT5, CAT6
5. Network cable compression detection speed: 1 second
6. Signal transmission distance: 3 kg
7. Input voltage protection: 60 V
8. Network cable detector: dupports detecting shielded and unshielded network cables on switches, routers, and other devices operating at voltages less than 60 V or without power.
9. Auto-power off: automatically shuts off after 30 minutes.
10. Power supply: 9V 6F22 Battery (Not Included)
11. After cable tracing is complete, a cable connection diagram is created to verify line connectivity and identify shorts, opens, and misconnected pairs, accelerating troubleshooting.
12. Primarily used to quickly detect through-hole faults, locate fault points, and mark lines. It can also be used to quickly determine if optical fiber is broken, excessively bent, or poorly connected.
13. Searchable 4/8-core network cables, coaxial cables, telephone cables, and shielded/unshielded network cables.
14. Quickly troubleshoot and locate breaks, shorts, or damage in the cable. Hold the receiver probe close to the cable. If you hear a "clicking" sound, this is normal. Move the probe along the cable. 15. If the sound stops, the line is broken.
16. Supports 60V operation. Detects whether an Ethernet cable (e.g., Cat5e/Cat6) is providing power to a PoE-powered device (e.g., IP camera, wireless access point).
17. Weight: Sensor 82g / Receiver 85g
18. Dimensions: Sensor 125x60x32mm / Receiver 190x47x30mm